Oricom WRC001 IPX6 Wireless Reversing Camera with Magnetic Base

Introducing the Oricom WRC001 Wireless Camera System – your all-in-one solution for reversing, security, and monitoring.

Key Features:

• Wireless Camera with Night Vision: Enjoy crystal-clear black and white images thanks to infrared night vision.

• Daytime Clarity: Capture vibrant and detailed color footage in daylight.

• Weatherproof Design: With an IPX6 waterproof rating, it's built to withstand various weather conditions, ensuring reliable performance year-round.

• Extended Range: Monitor a wide area with an impressive range of MAX 15 meters (Without Obstructions).

• Convenient Charging: Say goodbye to frequent battery changes; the camera charges via USB.

• Flexible Mounting: Easily adapt to your unique installation needs with a strong magnet and Velcro.

• Smartphone Connectivity: Connect to your smart device using Oricom's free app for effortless monitoring.

Upgrade your monitoring capabilities with the Oricom WRC001 Wireless Camera System. (Note: Smart device not included.)

Pack Contents:

• 1 x WRC001 Wireless reversing camera with Magnetic Base
• 1 x USB Charging cable (5V Power Adaptor not supplied)
• 1 x Velcro mounting tape

Specifications:

Battery Capacity: 2160mAh
Battery Voltage: 3.7V
Recharge Time:Approx. 4.5h
Max Recharge Current:480mA
Operating Current:260mA
Transmit Power:17.3Bm (53.5mW)
Wireless Communication Format:WiFi
Wireless Transfer Distance:Up to 15m (without obstruction)
Ingress Protection Rating:IPX6

PLEASE NOTE:

The unit will run up to 8.5 hours on a full charge. A full recharge will take approximately 4.5 hours. To charge the camera, connect the supplied charging cable to a suitable 5V Power Adaptor (NOT INCLUDED). When connected and charging, a RED LED will illuminate to show charge in process.

Velcro Tape: 3Mâ„¢ Dual Lockâ„¢ Reclosable Fastener SJ3550. It is strongly recommended that the surface is thoroughly cleaned prior to application using IPA wipes, you can also use a primer to increase adhesion further. Installation temperature should be between 20-27°C. The pressure sensitive adhesive tape requires a clean dry surface and firm even pressure (15psi) to ensure good contact with the surface of the substrate to which it is being applied. It is advised to wait one hour after tape installation before installing the camera.